The Multiline DNI Set Configuration form is used to program Multiline DNI telephones. Use this form when performing the following tasks:
This form does not apply to the CX or CXi controller.
When deleting DNI sets, you must also delete the corresponding directory entries and voice mailboxes.
|
Parameter |
Description |
Default Value |
|
Cabinet, Shelf, Slot |
System-generated, protected field. Identifies the card position. |
|
|
Circuit |
System-generated, protected field. Identifies the hybrid circuit used for the associated device. |
|
|
First Channel |
Select the attached device type. |
Blank |
|
Second Channel |
Select the attached device type PKM12, PKM48, AIM, or Dual PKM. Unassigned channels must be left "No Device".
|
No Device |
|
Number |
Enter a unique internal directory number up to seven digits in length assigned to the line circuit. |
Blank |
|
Local-only DN |
Allows you to specify the directory number as a local-only directory number in a cluster. This box only appears in the form if your system has been migrated to support Remote Directory Number Synchronization. |
Not Selected |
|
ACD Enabled |
Select "Yes" if the telephone is to be an ACD set. This field cannot be changed from "Yes" to "No" if the telephone is part of an ACD hunt group.
|
No |
|
Line Type |
System-generated, protected field. Contains a default value of "not assigned". Once the line is programmed, the field shows "single line". Once a group is created, the field shows either "key system" or "multicall" as appropriate. |
|
|
Interconnect Number |
Enter a number, between 1 and 64, that references an entry in Interconnect Restriction. |
Blank |
|
Language |
System-generated, protected field. Indicates the set operating language. |
|
|
Tenant Number |
Enter the number of the set's tenant. |
1 (landlord) |
|
User PIN |
Enter a password for the user PIN. The PIN can only include digits from 0 to 9 and can be from 0 to 8 digits in length. |
Blank |
|
Confirm User PIN |
Re-enter the password to confirm. |
Blank |