Program an IP Paging Unit

To program a Mitel IP Paging Unit (this procedure will produce a ring burst at the beginning of each page):

1. Multiline IP Set Configuration form
   Program the IP Paging Unit as "5010 IP".
   Enter the MAC address.

2. Feature Access Code Assignment form (optional)
   Assign a code to Direct Page Paging.

3. Multiline Set Key Assignment form (optional)
   Program a Paging key.

4. Interconnect Restriction Table
   Ensure that the station is not restricted from Paging.

To program Group Page with the IP Paging Unit (This programming procedure will ensure that a ring burst does not occur prior to the speech broadcast):

1. Multiline IP Set Configuration form
   Program the IP Paging Unit as "5010 IP".
   Program the MAC address.

2. Page Group Assignment form
   Complete all required fields.
   Note: Symbol Wireless Phones should not be programmed into paging groups.

3. Class of Service Options Assignment form
   Set the Group Page Accept field to "Yes" for the IP Paging Unit.
   Ensure that each telephone in the paging group has the Group Page Allow field set to "Yes".

4. Feature Access Code Assignment form (optional)
   Assign a Direct Page feature access code.

5. Multiline Set Key Assignment form (optional)
   Program a Paging key.

6. Interconnect Restriction Table
   Ensure that the station is not restricted from Paging.